Best Price Porter Cable DA250B. Free Shipping. Buy Now!.
Read more Porter-Cable DA250B 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer
I have used this finish nailer for two years now. I have never had a double fire and it has never jamed up. It has a strong design and shows little wear even though I have used it on lots of finish carpentry. I however wish it had the bounce fire option. When nailing on long sticks of paint grade base it would be nice to be able to bounce along. Overall the gun has good results but I am a hitachi convert.
I have gone almost exclusively to Porter-Cable tools. I believe they are the best choice for contractors and heavy duty home use. The 15 gauge finish nailer performs better than any previous finish nailer that I have used. I would highly recommend Porter-Cable to any serious wood worker, or contractor.
Had this for a few years now. Great balance,even when in awkward positions. Depth settings work good. Haven't had a jamb up yet. Great product at a great price. Would deffitnetly recomend this product. Thanks AMAZON!
Great tool for most people, I don't think this is one you would want on the jobsite though (it might not stand up over time). Easy to use and is comfortable to use.
I am remodeling my second house and this finish nailer is still going strong. I use it for all my base and crown moldings as well as window and door molding. Has a good set not requiring you to go back and sink the nails more.
Bought this to finish up the trim on the tool shed and I was disappointed to see how fussy and flimsy it is. Before I could use more than a few sticks of nails (it comes with a box of 1000 nails), it stopped driving nails. After looking at it for a while, my tool expert friend figured out that the two shaft rails that hold the contact head were slightly bent. No idea how it got bent. Normal use. So he carefully straightened the rails and got it working again.
Then, about 2 or 3 sticks of nails later, it jammed on the last nail of one stick, with another stick right behind. No problemo, it says in the manual, just flip up the easily accessed jam remover cover (oops, why do I need this?), but the nail turned out to be jammed so hard it could not be removed without disassemling the head. After a little more precious time down the drain, set this unit down and off to HD to buy some other brand.
(This is all too bad, because my other nailgun is the Porter-Cable coil framing gun. It is a fabulous, reliable, heavy duty tool. Not a relative of the DA250, I guess.)
In the end, I got a Bostich D51275K 15 gauge nailer, which has already outlasted the Porter-Cable. Visibly sturdier and it has a few nicer features, as well.
I can't think of a single thing that I would change about this gun. It loads easily, it is well balanced and not too heavy, the drive depth is easy to adjust, and it has never jammed even though I drive mostly 2-2.5 inch nails. I also have a 2 inch brad nailer and that may be sufficient for most people who are only going to nail molding. But for applications that require a 2.5 inch long nail or more structural support, this nail gun is perfect. I bought mine reconditioned for about a 20 percent savings and it has worked flawlessly and looked brand new.
12/9/04 My company owns 3 of these and they really do have a strong shot. We had no problems with getting the nails to set in the toughest materials. Our problems came after 8 mos of use. One of the units began having frequent jams and then started misfiring on a consistent basis. I'm a little concerned because another one of our DA250B nailers has also become somewhat unpredictable and sometimes jams. I definitely recommend the DA250B over the Senco SFN 35 or any Bostich nailers. The Senco SFN 30 and 40 are OK units. My top pick however is the Dewalt Angled Finish Nailer D51275K. All of our crews like this nailer over any of the finish nailers we've used. (Bostich, Porter Cable DA250B, Senco SFN 35, 40, 30). I will say that for the infrequent user either The Porter Cable DA250B or Dewalt D51275K will perform nicely.
Note: We use these finish nailers primarily in oak but sometimes in wood species such as Brazilian Cherry, Mahogany, Rosewood, Maple and other exotic wood types.
Update 07/07/05: I have had each of the 3 Porter Cable DA250B in the shop for repair 1-3 times each within the 1st year. I think it's time to switch entirely to Dewalt. Porter Cable shouldn't mind now since it's owned by the same company now. Also I should add that the Dewalt finish nailer we have is still working flawlessly with the original driver and it gets more use than the Porter Cables.
Excellent tool. Saved me a lot of time putting up trim work. Lightweight so you can use it all day and wonder where the time went.
I was building a cabinet the other day and using this nailer, and man, I tell you, you could feel and hear the power of this puppy throughout the shop. It fired rounds of 2" nails in solid oak and with every shot, there was a consistent message being sent out to the wood, "don't mess with me"! <br>When working with solid hardwood material, and finish nails, the last thing that you want is your nails to be proud of the surface where you have to go back and set them all manually, or the nailer leaving an ugly mar on the surface. None of that with this baby;) It sets the nails and does it exactly where you want them. Very nice tool!
Images ScreenShot
About Porter-Cable DA250B 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer detail
Related Product
Source From Best Price Porter Cable DA250B For Sale Best Buy Porter Cable DA250B Low Price Buy Cheap amp Review
Have a COOL !
Cheers
No comments:
Post a Comment